Download: MH-PBL52 Manual         
Thank you for purchasing the Powerex MH-PBL52 LED Rechargeable Power Bank Lantern.
Read these instructions carefully and thoroughly before operating this unit. IMPORTANT SAFETY INSTRUCTIONS. READ AND SAVE THESE INSTRUCTIONS.

GENERAL PRECAUTIONS:

  1. In order to prolong the life of the battery, please charge it at least once every 6 months.
  2. Do not place this product under high temperature and high humidity environment. Use in conditions between 0° to 120° F (-20° to 50° C).
  3. Do not let the product get close to electronic medical apparatus or close to the people who have pacemakers or other medical devices.
  4. Do not submerge this product in water.

The LED Rechargeable Power Bank Lantern is not only a powerful lantern light, it is also a USB power bank. It can be hanged on a camping tent hook or be laid out horizontally on a desk as a reading light. What’s more, the strong magnet allows you to put the lantern on a metal surface. It can also be used as an emergency power source during a power outage.  


1 Year Limited Warranty


BOX CONTENTS:                             
Lantern
USB Cable
Manual


SPECIFICATIONS:
Capacity:  5200mAhUSB
Input:  DC 5V/2A (max)Manual
Output:  DC 5V/2A (max)                
Dimension: Ø 80x60mm




PLEASE CHARGE THE POWER BANK LANTERN BEFORE USING IT FOR THE FIRST TIME. 


HOW TO CHARGE THE POWER BANK LANTERN:

  1. Connect the USB cable (included) to the “INPUT” USB port. Your device should now start charging.  Please Note:The USB cable must be first connected to a compatible USB power supply (not included).




HOW TO USE THE LANTERN:

  1. Press once, the LED indicator will turn on.
  2. Then press and hold for 1.5 seconds, the lantern light will turn on in the Medium light mode.
  3. You can shift the light mode from one to another by pressing the ON/OFF button one time:  Press (LED indicator on) --- Long Press (Medium) --- Press (Low) --- Press (High) --- Press (Strobe Mode) --- Press (SOS) --- Long Press (Lantern Light Off).
  4. Long press controls the lantern light on and off.




HOW TO USE THE POWER BANK:

  1. Press once, the LED indicator will turn on.
  2. Connect your device’s charging cable to the “OUTPUT” USB port. Your device should now start charging.